2018 John Deere 325 G Skid Steer SOLD

Additional Information

3600 Hours
Comes with Cab, Heat, Air, 2 Speed,
Back-up-camera, air ride seat, Radio, Ride Control, Creeper Transmission, Panoramic lighting, Quick Attach, Selectable H pattern or ISO,
New ZigZag camoplast Tracks.
78 inch Smooth edge bucket.
The Unit has been fully serviced including all filters, engine oil, planetary oil.
Very good condition.
$64,900.00

DESCRIPTION
Engine Manufacturer Yanmar
Engine Model 4TNV98CT
Aspiration Turbo
Displacement, ltr (Inches³) 3.3 (203)
Rated Speed, rpm 2500
Engine Output – Net, kW (hp) 52.5 (70)
Engine Output – Gross, kW (hp) 54.8 (74)
Torque, Nm (lbf / ft) 280 (207)
Track Shoe Width, mm (inches) 320 (12.6)
DRIVELINE
Length – No Bucket, mm (inches) 2850 (112.3)
Length – Foundry Bucket, mm (inches) 3460 (136.3)
Width – No Bucket, mm (inches) 1820 (71.5)
Height – Top Of Cab, mm (inches) 2060 (81.1)
Ground Clearance, mm (inches) 240 (9.3)
Rear Departure Angle, Degrees 30.5
Height to Hinge Pin, mm (inches) 3200 (126.1)
Dump Angle, Degrees 41
Dump Height – Maximum Foundry, mm (inches) 2590 (102.1)
Rollback – Ground Level, Degrees 34
DIMENSIONS
Fuel Tank, ltr (gallons (US)) 79 (21)
CAPACITIES
Rated Operating Capacity – Foundry, kg (lbs) 1176 (2590)
Tipping Load – Foundry, kg (lbs) 3360 (7400)
Ground Bearing Pressure – Foundry, kPa (PSI) 39.3 (5.7)
Speed – Maximum, kph (mph) 13.2 (8.2)
Breakout – Lift Foundry, kN (lbf) 23.3 (5250)
Breakout – Bucket Foundry, kN (lbf) 38.9 (8750)
Hydraulic Power, kW (hp) 30.617 (41)
Hydraulic Power – Option, kW (hp) 47.103 (63.1)
Pump Flow, lt/min (gallons (US) / min) 78 (21)
Pump Flow – Option, lt/min (gallons (US) / min) 120 (32)
System Pressure, bar (PSI) 237.87 (3450)
PERFORMANCE
Operating Weight – Foundry, kg (lbs) 4313 (9500)